Visa Direct

If the push payment is part of a Funds Disbursement service, only the push part of the funds transfer transaction is needed. The money to fund the disbursement is usually pulled from the sender’s bank account and settled outside of the Visa network.

Sometimes a push payment fails, usually because the push payment was declined by the receiving issuer. In that case, if the source of funds was a pull from a Visa card using the Funds Transfer API, then you must return the funds to the sender’s account the same way. If the sender’s funds were obtained from another source, you are responsible for returning them to the sender using other means.

The request payloads of the six operations differ somewhat due to the different functionality they deliver, but all of them generally require this type of information in the POST request:

• An Acquiring BIN and its Country Code.
  This is the Bank Identification Number (BIN) that is used to clear and settle the transaction within Visa and the country in which it is licensed for use. If you are a financial institution (or have a Visa acquirer POS license), you can decide which of your licensed BINs you will use for funds transfer activity. This should be a unique BIN that is not shared with any other Visa service. If you are a sponsored third-party Originator, your sponsoring financial institution will assign an Acquiring BIN to you when you establish your acquiring relationship with them. You can obtain a test Acquiring BIN on your Project Dashboard for use in sandbox testing, but you will need to register your actual Acquiring BIN(s) with Visa during production onboarding.
• Business Application Identifier (BAI)
  This is a two-character code that identifies the intended use of a push payment. It determines the data carried in the message, the limits and economics that may apply to the transaction, and may be used by the sending and/or receiving issuer to make an authorization decision. You can find permissible values in the Request and Response Codes Reference.
• Information about an Individual Sender or Sending Entity
  These fields (referred to as the Merchant and Card Acceptor fields in the technical specification) identify the sender and sender transaction narrative as it will appear on the cardholder’s statement. The sender- related information would typically be collected from the sending customer and included in the appropriate fields in the request.

You can find the technical specifications of each operation on the API Reference link. All of these operations generally return these same fields in the response:

• Visa Transaction Identifier
  This is a unique reference number for this transaction that is assigned by Visa. To tie a PushFunds operation together with a previous PullFunds operation, you must populate the Transaction Identifier from the PullFunds response into the subsequent PushFunds request.
• Action Code
  A two-character code that indicates the result of the request. You can find a complete list of Action Code values and API Error Code values on the Request and Response Codes Reference.
• Approval Code
  This is the six-digit authorization code provided by the sending or receiving issuer.
  

The Funds Transfer API also supports the Visa Push Payments Gateway Service (PPGS) which allows originators to send PullFundsTransactions (AFTs) and PushFundsTransactions (OCTs) to multiple U.S. debit networks. Visa PPGS offers clients the following benefits:

• Common access for authorizations
  This enables the use of a single connection and message format to process debit transactions for multiple networks.
• Management of routing priority
  This allows acquirers to establish a routing priority list in Visa for the Debit Networks. Additionally, Originators can provide priority information in the message for the Debit Networks whose cards they accept. Visa recommends that clients understand rules related to routing before implementation.
• Multiple routing lists
  This allows client to create a set of rules for a push transaction that are different from those established for a pull transaction.

The following fields, in addition to the ones supported for Visa Direct transactions destined to Visa accounts, are required to send PullFundsTransactions (AFTs) and Push FundsTransactions (OCTs) to the debit networks:

• Pseudo ABA Number
  This is a number that uniquely identifies the originator when they sign up to send Push Payment transactions. On enrollment, an originator will get a single pseudo-value that is assigned by Visa. The other debit networks will assign their own unique values for the originator.
• Sharing Group Code
  This field is optionally used by originators to specify the network access priority. Visa makes a routing selection based on the routing priorities specified by both the originator and issuer preference for routing over the network.
• Network ID
  This contains a code that specifies the network to be used for transmission of the message and determines the program rules that apply to the transaction.

For additional information, contact your Visa account representative.

The Funds Transfer API enables Originators to use an API to withdraw (debit) funds from an eligible Visa card by directly submitting an Account Funding Transaction (AFT) into the Visa network. The AFT is used to pull funds from Visa accounts for the purposes of funding other non-merchant accounts, such as loading or topping up prepaid card accounts, moving funds into another financial account such as a Certificate of Deposit or Individual Retirement Account, acting as the funding source of person-to-person payments, or to load a third-party digital wallet.

Once you have collected the necessary information from the sender, you can submit a pull funds transaction to Visa using either the PullFunds operation (for a single account) or the MultiPullFunds operation (for multiple accounts simultaneously). In a PullFunds operation, the request message includes the sender account, amount, and applicable point of service data elements for a single account. The PullFunds operation submits a single AFT transaction into Visa for the account specified in the request and returns the response variables for that account. A successful response message will include status information, a Visa-assigned transaction ID, and various approval codes.

In the MultiPullFunds operation, the sender account, amount, and point of service data elements are repeated in the request message for each account from which funds are to be pulled. The MultiPullFunds operation is most typically used when you have accumulated a “batch” of pull funds transactions and it is more convenient to submit them all in a single API call. A maximum of 499 sender accounts can be included in a single MultiPullFunds request. The MultiPullFunds operation will submit an individual AFT transaction into Visa for each account specified in the request and return a separate response for each one.

Because it may take more time to process a pull request that contains many accounts, a successful MultiPullFunds POST request returns a unique Status Identifier instead of individual account details. To retrieve the status and details for the accounts in the original request, submit a MultiPullFunds GET request using the Status Identifier from the POST response in the link header, which will then return status and details for each account in the original request.

You can find the technical specifications for both the PullFunds and MultiPullFunds operations on the API Reference link. Any pull funds transaction generally requires the following types of information in the request message:

• Sender Account Information
  These fields include the Primary Account Number (PAN) of the Visa account from which the funds will be pulled as well as the account expiration date and billing currency.
• Transaction Amount and Fees (if applicable)
  This is the total amount to be pulled from the sender account, inclusive of any fees that are assessed for the transaction. If you are charging a service fee and/or a foreign exchange rate markup in addition to the pull amount, the applicable fees must be included in the Transaction Amount and itemized separately in the applicable fields in the request message.
• Point of Service Information
  The request requires several data fields that identify the nature of the point of service – whether card-present or card-not-present. If the sender data was collected through an online or mobile application, the point of service fields should be populated with values that are appropriate to a card-not-present or e-commerce transaction. Pull funds transactions originating in the U.S. are restricted to the e-commerce environment. Outside the U.S., if the sender account data was obtained with a card swipe at a physical point of service, the Track 1 and/or Track 2 and/or PIN data (as applicable) must be captured from the card reader/terminal device and include it in the applicable fields in pull funds request message.
  

You should log or otherwise retain all of the information returned in the PullFunds or MultiPullFunds response. If you must return funds to the sender for any reason, you may need to include several of the response values in a ReverseFunds or MultiReverseFunds request.

The Funds Transfer API enables Originators to use an API to send (credit) funds to an eligible Visa card by directly submitting an Original Credit Transaction (OCT) into the Visa network. The OCT is used to push funds to Visa accounts to enable services such as person-to-person money transfers, funds disbursements, prepaid loads, and credit card bill payments.

Once you have collected funds from the sender, you can submit a push payment transaction to Visa using either the PushFunds operation (for a single account) or the MultiPushFunds operation (for multiple accounts simultaneously). In a PushFunds operation, the request message includes sender information, recipient information, and transaction amount data elements for a single account. The specific data elements required in the request may vary depending on the use case and local regulation. Refer to the technical specifications in the API Reference link and the local regulations that apply. The PushFunds operation submits a single OCT transaction into Visa for the recipient account specified in the request and returns the response variables for that account.

In the MultiPushFunds operation, the sender information, recipient information, and transaction amount data elements are repeated in the request message for each account to which funds are to be pushed. The MultiPushFunds operation is most typically used when you have accumulated a “batch” of push funds transactions and it is more convenient to submit them all in a single API call. A maximum of 499 recipient accounts can be included in a single MultiPushFunds request. The MultiPushFunds operation will submit an individual OCT transaction into Visa for each account specified in the request and return a separate response for each one.

Because it may take more time to process a push request that contains many accounts, a successful MultiPushFunds POST request returns a unique Status Identifier instead of account details. To retrieve the status and details for the accounts in the original request, submit a MultiPushFunds GET request using the Status Identifier from the POST response in the link header, which will then return status and details for each account in the original request.

You can find the technical specifications for both the PushFunds and MultiPushFunds operations on the API Reference link. Any push payment request generally requires the following types of information in the request message:

• Recipient Information
  These fields include the recipient’s primary account number, name, and billing currency of the Visa account. Recipient name and billing currency may be selectively required depending on the use case and processing methodology.
• Transaction Amount
  This is the amount to be delivered to the recipient (in the recipient currency). Note that Visa imposes both geographical and use case-based limits on the maximum amount that can be included in a single transaction. For example, domestic person-to-person transfers have a default limit of USD$2,500. There are exceptions, such as in the U.S., where a limit of USD$10,000 per transaction applies. Refer to the API Reference link for specific details.
• Sender Information
  These fields include information about the sender, such as a name and address, date of birth, and either the sender’s primary account number or a reference number that refers to the source of the funds being sent to the recipient. For the purposes of risk, sanctions enforcement, and anti-money laundering/anti-terrorist financing controls, and regardless of funding source or access channel, you are responsible for verifying the identity of the sender before submitting a push payment request.
• Transaction Identifier
  If a PushFunds operation follows a corresponding PullFunds operation, you are required to take the Visa Transaction Identifier received in the PullFunds response and populate it into the same field in the PushFunds request in order to link the two transactions together.

Fast Funds

As part of a push payment service, you may want to inform the sender or the recipient about when to expect the funds to become available. For a conventional push payment, the recipient issuer must make the funds available in the recipient account as soon as possible but no later than two business days. Many issuers now participate, or are mandated to participate, in Fast Funds, which means that they agree to make funds available in the recipient account within 30 minutes of approving the push payment authorization. You can use the Funds Transfer Attributes Inquiry API to determine if the recipient issuer participates in Fast Funds.

Geographic Restrictions
A common requirement of person-to-person payments and other push payment use cases is the need to restrict transfers to a limited number of geographies, either due to business considerations or to local law and compliance requirements. For a domestic funds transfer program, this could mean restricting push payments to intra-country recipients. For a cross-border remittance program, this could mean restricting push payments to a selected group of destination countries.

Traditionally, Originators had to implement the functionality within their own systems to maintain a list of prohibited or permitted countries, pre-validate the country of the recipient account, and then submit or block the transaction as needed.

Visa has optional functionality in the Funds Transfer API that allows Originators to configure geographic restrictions within Visa Direct during production onboarding so that they can be automatically enforced by Visa. If you choose this option, Visa will automatically apply your pre-configured geographic rules to every Funds Transfer API request and will block any push funds transaction to a card issued in a country that is restricted based on your configuration rules. Contact [email protected] for more information.

Foreign Exchange (FX) Markup
Many Originators want to incorporate a foreign exchange markup on cross-border money transfers as an additional source of revenue. Traditionally, Originators had to maintain their own lists of reference rates, look up the currency of the recipient account and applicable reference rates for each transaction, and apply the markup on top of the reference rate in order to determine what rate to use for each individual transaction. For Originators who operate in many markets, this can be a complex and costly process.

Visa has optional functionality that allows Originators to configure either a single standard FX markup rate to be applied to all transactions or separate FX markup rates for specific currency pairs. If you choose this option during production onboarding, when you use the Foreign Exchange Rates API to determine the transaction amount in recipient currency, Visa will automatically apply your preconfigured markup rate for the currency pair when converting the source amount into destination currency. The Foreign Exchange Rates API will return Visa's daily base rate, the actual conversion rate used (base rate plus markup), and the recipient transaction amount. Review the Foreign Exchange Rates API for more details or contact [email protected] for more information.

The Funds Transfer API enables Originators to use an API to return (credit back) funds to a Visa card from which funds were withdrawn earlier using a Funds Transfer API pull funds operation. If a push payment fails to complete, you must reverse the original pull funds transaction by using either the ReverseFunds operation (for a single account) or the MultiReverseFunds operation (for multiple accounts simultaneously).

In a ReverseFunds operation, the request message includes the sender account, amount, and applicable point of service data elements for a single account to which funds are to be returned. The ReverseFunds operation submits a single AFT reversal transaction into Visa for the account specified in the request and returns the response variables for that account.

In the MultiReverseFunds operation, the sender account, amount, and point of service data elements are repeated in the request message for each account to which funds must be returned. The MultiReverseFunds operation is most typically used when you have accumulated a “batch” of reversal transactions and it is more convenient to submit them all in a single API call. The MultiReverseFunds operation will submit an individual AFT reversal transaction into Visa for each account specified in the request and return a separate response for each one.

Because it may take more time to process a reversal request that contains many accounts, a successful MultiReverseFunds POST request returns a unique Status Identifier instead of account details. To retrieve the status and details for the accounts in the original request, submit a MultiReverseFunds GET request using the Status Identifier from the POST response in the link header, which will return status and details for each account in the original request.

You can find the technical specifications for both the ReverseFunds and MultiReverseFunds operations on the API Reference link. Any reverse funds request generally requires the following type of information in the request message:

• Data Elements from the Original Pull Funds Request
  The reversal request must include some of the fields that were part of the original pull funds request and its response, including the Systems Trace Audit Number, Retrieval Reference Number, Transaction Identifier, Approval Code, Date and Time of Transmission, and Acquiring BIN.
• Sender Account Information
  These fields include the primary account number of the Visa account to which the funds will be returned as well as the account expiration date and billing currency.
• Transaction Amount and Fees (if applicable)
  This is the total amount to be returned to the sender, inclusive of any fees that you may have assessed on the original pull funds transaction. If you charged a service fee and/or a foreign exchange rate markup in addition to the pull amount, the applicable fees must be included in the Transaction Amount and itemized separately in the applicable fields in the request.
• Point of Service Information
  For a funds reversal request, you should populate the point of service fields with values that are appropriate to a card-not-present or e-commerce transaction.

If a MultiPushFunds operation was used to push funds to a batch of Visa accounts, remember that the response message will contain a separate results status for each account number submitted. Since each account is processed individually by Visa, some push funds requests within a MultiPushFunds operation may have succeeded and others may have failed. Before submitting either a ReverseFunds or MultiReverseFunds operation request, you must individually assess the results status of each account and only send reversal requests for those accounts with failed push payment authorizations.

The consumer initiates a payment by scanning a QR code at the merchant site, tapping an NFC device, or key entering the merchant and transaction details into their Mobile Push Payment-enabled feature phone or Mobile Push Payment smart phone application. The consumer's issuer then uses the Mobile Push Payment API to submit a push payment transaction into Visa that will transfer the payment amount from the consumer's Visa card to the merchant's Visa card. When the push payment is received by the merchant's issuer (acquirer), the merchant is notified that the amount of the payment has been deposited into their Visa account. When the merchant issuer sends the approved authorization for the push payment back to Visa, the consumer's issuer notifies them via the Mobile Push Payment application that the transaction is complete.

The Mobile Push Payment API includes several additional fields that are not used for Funds Transfer API and (depending on the use case) excludes some fields that are normally present in a Funds Transfer API. You can find the technical specifications for the Mobile Push Payment API on the API Reference link.

Mobile Push Payment applications typically support one or more of four basic use cases: person-to-person transfers, payments to merchants, cash in (deposit to a Visa card via an agent), and cash out (withdrawal from a Visa card via an agent). For person-to-person transfers, you should use the standard Funds Transfer API push payment operations. For merchant payments, cash in, and cash out, you should use the Mobile Push Payment API.

The Mobile Push Payment SDKs provide the software library that you can embed within your mobile app to pay and be paid using mobile phones. The mobile SDK contains a unified overall Mobile Push Payment experience (with limited customization) that enables Mobile Push Payment transactions, such as peer-to-peer money transfer, cash withdrawal and merchant payments. Each library launches a specific sequence of user interface and interaction required to complete the Mobile Push Payment transaction.

The Mobile Push Payment SDKs are available for use by Issuers and Acquirers.

You can view and download all Visa Direct assets, such as SDKs from the Visa Developer Project Dashboard. Please refer to Access Assets for more details.

1. Dimitry opens his mobile banking application to send money to a friend.
   
2. Dimitry is presented with his phone contact list. Each contact who has Alias payments enabled is already highlighted. 
3. He chooses to send money to Gennadi and enters the amount. Dimitry also selects the correct account to fund the transfer from. 
4. Dimitry confirms the transfer details. 
   
5. Done! Dimitry has now sent money to Gennadi using Gennadi's phone number. 

To learn more, please visit this page. 

The Watch List Screening API accepts the name, city, and country of a person and returns a score that indicates how closely that person's information matches to any entries on the regulatory watch lists supported by the API. Currently, the API only screens against the United States Office of Foreign Assets Control (OFAC) Specially-Designated Nationals (SDN) sanctions list.

For cross-border person-to-person money transfers, you may or, in some cases, must screen sender information against national or international watch (or sanctions) lists before allowing your customer to send money to another Visa cardholder. Depending on the nature of the services your project provides, there may be other situations in which it may be prudent to prescreen customer information before delivering services.

To use the Watch List Screening API, you must provide the following information in the request about the person being screened:

• Name
  This is the name of the person to be screened. The name can be any alphanumeric value up to 30 characters in length (and in the Latin character set). The suggested format of the name field is Last Name/Family Surname + space + Additional Last Name/Family Surname (if applicable) + space + First Name + space + Middle Initial/Middle Name.
• City and Country
  These fields are the city name and the alphabetic or numeric ISO country code of the address of the person being screened.
  

The API uses a “Fuzzy Match” algorithm to assess how closely the person’s information matches entries in the regulatory watch list. The algorithm produces a match score between 000 (low likelihood of a match) and 100 (high likelihood of a match). The response message includes both the match score and a Status field. The value “Not Approved” in the Status field indicates that Visa would likely decline a push payment transaction involving the person whose name was provided in the request.

For tracking purposes, if you will be using the Watch List Screening API in conjunction with calls to the Funds Transfer API, please populate the following optional fields in the request message (Acquiring BIN and Acquirer Country Code) with the corresponding values that you plan to use in the Funds Transfer calls. Otherwise, you may exclude all of those fields from the request.

Note that Visa also automatically watch list screens all cross-border person-to-person money transfer OCTs intended for delivery to a recipient Visa account in all countries where screening of inbound transactions is required. In that case, Visa provides the watch list match score to the recipient issuer in the OCT transaction.

The Watch List Screening API is provided as a service to developers and is available to all developers in both sandbox and production. Using it does not relieve you of any obligations you may have to comply with applicable law and regulations. Visa makes no representations or warranties with respect to the Watch List Screening API or its results nor shall Visa have any liability whatsoever for the scoring results or the Watch List Screening API. Visa retains the right to review your project's implementation of this API prior to production onboarding to ensure appropriate use of its features.

As you build your new money transfer, prepaid load, credit card bill pay, or funds disbursement solutions using the Funds Transfer or Mobile Push Payment APIs, there are three other APIs available from Visa that may be useful in your project.

Payment Account Validation
The Payment Account Validation API provides several means for you to determine if a particular Visa account is valid and in good standing. Visa recommends that you use this API to validate the sender's account information before invoking a PullFunds or MultiPullFunds API call.

Payment Account Attributes Inquiry
The Payment Account Attributes Inquiry service includes two APIs (the General Attributes Inquiry and the Funds Transfer Attributes Inquiry) that enable you to look up important attributes of a Visa account that you may need in order to successfully implement a funds transfer project. In particular, you may need to know the type of account, what the billing currency is, who the issuer is and in what country, whether the recipient issuer is able to receive push payments or participates in Fast Funds, or whether the account is blocked from receiving certain types of push payments.

Foreign Exchange Rates
If your project supports cross-border transfers, you must notify the sender of the amount in the sender’s currency that will be withdrawn from the sender’s account. You may also want to notify the sender, the recipient, or both of the amount in the recipient’s currency of the push payment. The Foreign Exchange Rates API enables you to input a source amount and a source and destination currency pair and receive back the current day Visa exchange rate and the converted amount in the destination currency. For example, if the sender wants to withdraw a specific amount, this API will enable you to determine how much the recipient will then receive in their local currency. Similarly, if the sender wants the recipient to receive a specific amount in their local currency, this API will enable you to determine how much must be from the sender’s account to do so.

Customer Disclosure Requirements
Originators must provide the Terms and Conditions for their program to the customer and the customer must accept them before using any Visa Direct-based service. You are responsible for updating your Terms and Conditions to include the required disclosures and as required by law and industry practices. Visa strongly recommends that you prompt the sender to agree to the Terms and Conditions prior to initiating any API calls and retain evidence of the customer’s agreement. Visa retains the right to request that you provide copies of your updated Terms and Conditions to confirm that you are complying with these requirements.

Visa also requires you to provide senders with information related to fees and other material terms in connection with their push payments service. A clear itemized description of all Originator-assessed fees, including foreign exchange fees, if applicable, associated with the transaction must be communicated to senders subject to and in accordance with applicable laws and regulations of the area of operation of the Originator. You must provide senders with the opportunity to agree to the fees and proceed with or cancel the transaction.

Visa also requires you to comply with the Visa Core Rules and Visa Product and Service Rules (formerly, the Visa International Operating Regulations) as well as local regulations and laws. You must comply with all applicable sanctions and “Know Your Customer”, anti-money laundering, and anti-terrorist financing laws. If you use a third party agent, the third party agent must follow all Visa Core Rules and Visa Product and Service Rules related to working with such agents.